equipment Archives - Pierangelo Service Srl https://www.pierangeloservicesrl.com/tag/equipment/ Tailor Made Enrobing Machine for Cones, Automatic Sleeving Machine Mon, 20 May 2024 12:05:14 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.2 ERMW – Equipment for Stripping Flat Coated Wire https://www.pierangeloservicesrl.com/2021/tailor-made-machinery/equipment-stripping-flat-coated-wire-ermw/?utm_source=rss&utm_medium=rss&utm_campaign=equipment-stripping-flat-coated-wire-ermw https://www.pierangeloservicesrl.com/2021/tailor-made-machinery/equipment-stripping-flat-coated-wire-ermw/#respond Fri, 05 Nov 2021 06:48:31 +0000 https://www.pierangeloservicesrl.com/?p=3756 This equipment can be used to produce the following end products: Stripping Flat Coated Wire Flat Coated Wire Flat Coated Wire Stripping The equipment performs the stripping of the coated flat rope for an adjustable length. This consists of an aluminum base [...]

The post ERMW – Equipment for Stripping Flat Coated Wire appeared first on Pierangelo Service Srl.

]]>
Equipment for Stripping Flat Coated Wire Series ERMW
Equipment for Stripping Flat Coated Wire Series ERMW

This equipment can be used to produce the following end products:

  • Stripping Flat Coated Wire

  • Flat Coated Wire

  • Flat Coated Wire Stripping

The equipment performs the stripping of the coated flat rope for an adjustable length.

This consists of an aluminum base on feet on which the following units are applied:
– a vice operated by a pneumatic cylinder
– a stripping system with knives applied to a sliding carriage, operated by a pneumatic cylinder
– a sliding carriage driven by a pneumatic cylinder on which the group of knives is fixed
– a pneumatic control panel for the management of the work cycle

equipment

Technical Data

– dimensions: 70 x 70 x H 30 cm
– weight: 40 Kg
– pneumatic supply 5 bar
– working cycle execution time: about 2 sec.
The operator inserts the coated rope in the vice holding it against the mechanical stop, then presses the pedal to execute the work cycle.

The following operations are carried out in sequence: clamp closure, incision of the cable coating with knives, stripping and finally repositioning of the units in the starting conditions.

At the end of the operation he must remove the rope.

Notes: The data included are not binding

Watch Video

The post ERMW – Equipment for Stripping Flat Coated Wire appeared first on Pierangelo Service Srl.

]]> https://www.pierangeloservicesrl.com/2021/tailor-made-machinery/equipment-stripping-flat-coated-wire-ermw/feed/ 0 EMC-1 – Equipment for Mechanical Cutting Wire https://www.pierangeloservicesrl.com/2021/tailor-made-machinery/equipment-for-mechanical-cutting-wire-series-emc-1/?utm_source=rss&utm_medium=rss&utm_campaign=equipment-for-mechanical-cutting-wire-series-emc-1 https://www.pierangeloservicesrl.com/2021/tailor-made-machinery/equipment-for-mechanical-cutting-wire-series-emc-1/#respond Thu, 04 Nov 2021 21:00:11 +0000 https://www.pierangeloservicesrl.com/?p=3750 This equipment can be used to produce the following end products: Mechanical Cutting Wire Cutting Wire Mechanical Cutting of the Steel Cable Mechanical Cutting of the Stainless Steel Cable The equipment performs the mechanical cutting of the steel or stainless steel [...]

The post EMC-1 – Equipment for Mechanical Cutting Wire appeared first on Pierangelo Service Srl.

]]>
Equipment for Mechanical Cutting Wire Series EMC-1
Equipment for Mechanical Cutting Wire Series EMC-1

This equipment can be used to produce the following end products:

  • Mechanical Cutting Wire

  • Cutting Wire

  • Mechanical Cutting of the Steel Cable

  • Mechanical Cutting of the Stainless Steel Cable

The equipment performs the mechanical cutting of the steel or stainless steel cable.

The equipment consists of:
– a painted iron bench having dimensions of 2000x800xH880 mm which the mechanical cutting unit is fixed to one side;
– an iron support with pneumatic cylinder controlled by a pedal;
– a cutting unit with interchangeable shear;
– an adjustable support stop, to change the cutting length;
– a pneumatic pedal to control the cutting unit;
– a totalizer for counting the cycles performed;

The equipment is suitable for cutting steel or stainless steel wire rope with coating from D.0,0 to D.2,0 mm.

equipment

Technical Data

– the equipment takes about 0.5 sec. to carry out the work cycle.
– dimensions: cm. 200 x 80 x H120
– weight: 50 Kg
– 5 bar pneumatic supply

Notes: The data included are not binding

Watch Video

Similar Machinery

The post EMC-1 – Equipment for Mechanical Cutting Wire appeared first on Pierangelo Service Srl.

]]> https://www.pierangeloservicesrl.com/2021/tailor-made-machinery/equipment-for-mechanical-cutting-wire-series-emc-1/feed/ 0 EPO-1 – Push-On Equipment https://www.pierangeloservicesrl.com/2021/tailor-made-machinery/push-on-equipment-coupling-interlocking-terminal-sheath/?utm_source=rss&utm_medium=rss&utm_campaign=push-on-equipment-coupling-interlocking-terminal-sheath https://www.pierangeloservicesrl.com/2021/tailor-made-machinery/push-on-equipment-coupling-interlocking-terminal-sheath/#respond Thu, 04 Nov 2021 20:37:53 +0000 https://www.pierangeloservicesrl.com/?p=3742 This equipment can be used to produce the following end products: Coupling Interlocking Terminal Sheath The equipment performs the coupling by interlocking between a terminal and the sheath. The equipment consists of an aluminum plate on feet on which the following [...]

The post EPO-1 – Push-On Equipment appeared first on Pierangelo Service Srl.

]]>
Push-On Equipment Series EPO-1
Push-On Equipment Series EPO-1

This equipment can be used to produce the following end products:

  • Coupling

  • Interlocking

  • Terminal

  • Sheath

The equipment performs the coupling by interlocking between a terminal and the sheath.

The equipment consists of an aluminum plate on feet on which the following units are applied:
– a vice operated by a pneumatic cylinder, for locking the sheath
– a pneumatic cylinder with adjustable stroke for pressing the terminal onto the sheath
– an electrical control panel with totalizer for counting the cycles performed

equipment

Technical Data

– dimensions: cm. 70 x 60 x H100
– weight: 35 Kg
– 5 bar pneumatic supply
– 230VAC power supply
– the equipment takes about 1 sec. to carry out the work cycle.

The operator inserts the sheath with the terminal in the vice, then presses the pedal to execute the work cycle

 

Notes: The data included are not binding

Watch Video

The post EPO-1 – Push-On Equipment appeared first on Pierangelo Service Srl.

]]> https://www.pierangeloservicesrl.com/2021/tailor-made-machinery/push-on-equipment-coupling-interlocking-terminal-sheath/feed/ 0 ESB – Equipment for Screwing Screws Series https://www.pierangeloservicesrl.com/2021/tailor-made-machinery/equipment-screwing-screws-esb/?utm_source=rss&utm_medium=rss&utm_campaign=equipment-screwing-screws-esb https://www.pierangeloservicesrl.com/2021/tailor-made-machinery/equipment-screwing-screws-esb/#respond Thu, 04 Nov 2021 17:13:45 +0000 https://www.pierangeloservicesrl.com/?p=3719 This equipment can be used to produce the following end products: Screwing Screws Screwing Screws Screwing The equipment tightens the screw in a register. The equipment consists of an aluminum base on feet on which the following units are applied: - [...]

The post ESB – Equipment for Screwing Screws Series appeared first on Pierangelo Service Srl.

]]>
Equipment For Screwing Screws Series ESB
Equipment For Screwing Screws Series ESB
Equipment For Screwing Screws Series ESB

This equipment can be used to produce the following end products:

  • Screwing Screws

  • Screwing

  • Screws Screwing

The equipment tightens the screw in a register.

The equipment consists of an aluminum base on feet on which the following units are applied:
– a rotating unit with hexagonal insert and clutch
– a trolley with manual sliding, in which a mask and a locking system for the register are fixed
– a control pedal;
– an electrical control panel

equipment

Technical Data

– the equipment takes about 1 sec. to carry out the work cycle.
– dimensions: cm. 50 x 20 x H40
– weight: 20 Kg
– pneumatic power supply 5 bar
– power supply 230/400 VAC

The operator inserts the register and the screw into the mask, pushes the trolley against the rotating insert and then presses the pedal to perform the tightening cycle.

Notes: The data included are not binding

Watch Video

Similar Machinery

The post ESB – Equipment for Screwing Screws Series appeared first on Pierangelo Service Srl.

]]> https://www.pierangeloservicesrl.com/2021/tailor-made-machinery/equipment-screwing-screws-esb/feed/ 0 ESR – Equipment for Screwing Register https://www.pierangeloservicesrl.com/2021/tailor-made-machinery/equipment-screwing-register-esr/?utm_source=rss&utm_medium=rss&utm_campaign=equipment-screwing-register-esr https://www.pierangeloservicesrl.com/2021/tailor-made-machinery/equipment-screwing-register-esr/#respond Thu, 04 Nov 2021 17:03:00 +0000 https://www.pierangeloservicesrl.com/?p=3715 This equipment can be used to produce the following end products: Screwing Register Screwing Register Screwing The equipment screws the two screws into the register, for a certain length, which can be adjusted. The equipment consists of: - a gearmotor having the [...]

The post ESR – Equipment for Screwing Register appeared first on Pierangelo Service Srl.

]]>
Equipment for Screwing Register Series ESR
Equipment for Screwing Register Series ESR

This equipment can be used to produce the following end products:

  • Screwing Register

  • Screwing

  • Register Screwing

The equipment screws the two screws into the register, for a certain length, which can be adjusted.

The equipment consists of:
– a gearmotor having the seat for the register to be screwed;
– an electrical control panel;
– a pair of pneumatic adjusters for adjusting the screwing length of the two screws in the register;

equipment

Technical Data

– the equipment takes about 2 sec. to perform the work cycle
– dimensions: cm. 34 x 44 x H30
– weight: 25 Kg
– pneumatic power supply 5 bar
– power supply 230/400 V 50/60 Hz

The operator, with the equipment stationary, inserts the register in the rotating seat, takes the two screws, then pressing the pedal, the forks are closed for the two screws and the gearmotor is automatically activated until the screws are completely screwed to the established length.

Notes: The data included are not binding

Watch Video

The post ESR – Equipment for Screwing Register appeared first on Pierangelo Service Srl.

]]> https://www.pierangeloservicesrl.com/2021/tailor-made-machinery/equipment-screwing-register-esr/feed/ 0