EMC-1 – Equipment for Mechanical Cutting Wire

EMC-1 – Equipment for Mechanical Cutting Wire

This equipment can be used to produce the following end products:

  • Mechanical Cutting Wire

  • Cutting Wire

  • Mechanical Cutting of the Steel Cable

  • Mechanical Cutting of the Stainless Steel Cable

The equipment performs the mechanical cutting of the steel or stainless steel cable.

The equipment consists of:
– a painted iron bench having dimensions of 2000x800xH880 mm which the mechanical cutting unit is fixed to one side;
– an iron support with pneumatic cylinder controlled by a pedal;
– a cutting unit with interchangeable shear;
– an adjustable support stop, to change the cutting length;
– a pneumatic pedal to control the cutting unit;
– a totalizer for counting the cycles performed;

The equipment is suitable for cutting steel or stainless steel wire rope with coating from D.0,0 to D.2,0 mm.

EMC-1 – Equipment for Mechanical Cutting Wire

Technical Data

– the equipment takes about 0.5 sec. to carry out the work cycle.
– dimensions: cm. 200 x 80 x H120
– weight: 50 Kg
– 5 bar pneumatic supply

Notes: The data included are not binding

Watch Video

Similar Machinery

Go to Top